UniGrip – Phenolic Adaptor Push-Fit Duct Hanger

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Safe Working Load:

Safe Working Load::

15 kg

Wire Compatibility:

Wire Compatibility: :

2.00 mm

Suspension Drop Lengths:

Suspension Drop Lengths::

1 – 10m (additional lengths available on request)

Enquire Now

Pobieranie produktów

UniGrip Phenolic Adaptor Technical Data Pack - ENGUniGrip - Lloyds Approval
Wyświetl wszystkie pliki do pobrania
UniGrip – Phenolic Adaptor Push-Fit Duct Hanger
SKU # UG*-PA
1
1
1
1

Purpose-Built for Phenolic and PIR Ductwork

UniGrip Phenolic Adaptor is designed specifically for attaching to phenolic and PIR fabricated rectangular ductwork.

Its push-fit design enables fast, tool-free installation directly into the duct surface or bracket, making it ideal for tight timelines and clean installs.

It also supports vapour sealing using aluminium tape, ensuring airtight performance where needed.

When you’re working on ductwork, UniGrip Phenolic Adaptor delivers a reliable, easy-to-install suspension solution.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

How it Works:

See how our UniGrip Phenolic Adaptor works below or download the Technical Data Pack for full installation guidance.

 UniGrip Phenolic Adaptor Technical Data Pack – ENG
1, Push-fit each fixing directly into the duct.
2. Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side, leaving at least 100mm. This then grips and locks the wire in place.
3. Push down the end cap to allow adjustment up and down the wire.
4. Screw down the top end cap to prevent accidental adjustment once installed.

Zestaw zawieszenia gotowy do montażu

We supply UniGrip Phenolic Adaptor hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Mocowanie podłoża (mocowanie końcowe)

Wszystkie nasze zestawy zawieszeń są wyposażone w szeroką gamę mocowań do podłoża, zaprojektowanych do pracy z różnymi rodzajami podłoży i punktów mocowania. Poniżej znajdą Państwo dostępne mocowania do tego produktu:

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko 45° (EO45)

Do zastosowania w wielu typach podłoży przy użyciu odpowiednich mocowań. Idealne do systemów naciągających.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko 90° (EO90)

Zakończenie krańcowe systemu linowego Gripple EO90 do mocowania na różnych podłożach za pomocą odpowiednich śrub / kotw.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnica drutu)
No.2: 2 mm (Średnica drutu)
No.3: 3 mm (Średnica drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa do Sufitu (CA)

Idealna do mocowanie produktów Gripple do betonu.

Bezpieczne obciążenie robocze: 45 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Nakrętka rombowa M8 (ER8)

Zawiesie Gripple z zakończeniem krańcowym ER8 zaprojektowane specjalnie do użytku z szyną montażową 41mm. Doskonale nadaje sie do mocowania wszelkich instalacji. Zakończenie idealne do stosowania z gamą UniGrip, XP oraz HF.

Bezpieczne obciążenie robocze: 250 kg
Available Sizes:
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)
No.4: 4.75 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pętla (FR)

Idealny do owinięcia pętli wokół płatwi, belek, wiązarów dachowych i innych odpowiednich elementów konstrukcyjnych.

Bezpieczne obciążenie robocze: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

MF Wedge

For the suspension of services from Metfloor® 60 and 80 profiles manufactured by Composite Metal Flooring

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa wstrzeliwana (DX, CG)

Opatentowane mocowanie krańcowe wieszaka Gripple ze wstępnie zamontowanym uchwytem końcówki gwoździa do montażu w betonie lub innym podłożu przystosowanym do techniki wstrzeliwanej.

Bezpieczne obciążenie robocze: 15 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pręt Gwintowany (EF6, EF8, EF10)

Zawiesie linowe Gripple z zakończeniem typu śruba przystosowane do kotwienia w sufitach betonowych, pokryciach metalowych, oraz innych podłożach gdzie można zamocować się śrubą.

Bezpieczne obciążenie robocze: 250 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)
No.4: 4.75 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko (EO)

Montaż do rożnego rodzaju podłoża przy pomocy odpowiednich elementów montażowych.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa przelotowa (SP)

Zakończenie krńcowe toggle systemu linowego Gripple doskonale nadaje się do poszyć dachowych, opraw oświetleniowych i innych wnęk

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutur)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Twist Clip

Ideal for hanging from suspended ceiling T-Bar, signage, acoustic baffles or luminaires.

Safe Working Load: Refer to hanger load ratings and safe working loads
Available Sizes:
No.1: 1.5 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

2 Długość linki

Od 1 do 10 m

(inne długości dostępne na życzenie)

Wszystkie nasze zestawy zawieszeń gotowe do montażu zawierają wstępnie przyciętą, zapętloną i zaprasowaną linkę w wybranej długości. Standardowe długości to 1–10 m.

3

UniGrip Phenolic Adaptor

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

  • Safe Working Load: 15 kg
  • Wire Compatibility: 2.00 mm
  • Suspension Drop Lengths: 1 – 10m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1

UniGrip – Phenolic Adaptor

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Key Specifications

Safe Working Load:: 15 kg
Wire Compatibility: : 2.00 mm
Suspension Drop Lengths:: 1 – 10m (additional lengths available on request)

Available Sizes

No. 2: 15 kg
Find a SupplierView Product Page

Pobieranie produktów

UniGrip Phenolic Adaptor Technical Data Pack – ENGUniGrip – Lloyds Approval

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertZnajdź sprzedawcę

Related Downloads

UniGrip – Lloyds Approval
UniGrip Range Technical Data Pack – ENG

Common Applications

Ductwork Suspension

Ductwork Suspension

Related Products

Nożyce do Lin

Idealny do cięcia konstrukcji lin stalowych 7×7 lub 7×19 od średnicy 1,5 mm do 6 mm.

View Akcesoria

UniGrip Y-Fit

Wire Hanger with Dual Fixing Points

Max Working Load: 110 kg
Leg Length Size Range: 150 mm – 500 mm
Maximum Off Axis Suspension: 15º
View Wariant mocowania

UniGrip – Standard

Wire Suspension for Slotted Channel or Strut

Max Working Load: 250 kg
Wire Compatibility: 2 mm, 3 mm and 4.75 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – Cable Basket Adaptor

Direct-fix Cable Basket Hanger

Max Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – Calibra

UniGrip Calibra | Height Adjustable Hook Fixing Hanger

Safe Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Wariant mocowania

UniGrip – Central Exit

Trapeze Bracket Wire Hanger

Max Working Load: 360 kg
Wire Compatibility: 2, 3, 4.75 and 6 mm
Suspension Drop Length: 1 – 10 m (additional drops available on request)
View Wariant mocowania

Trapeze Plus FR – Range

Fire Rated Cable Hanger Tested to F120

Max Working Load: 225 kg
Fire Testing: BRE tested to F120
Available Drop Lengths: 1 – 10 m (bespoke lengths available on request)
Zobacz produkt

Skontaktuj się z ekspertami Gripple

Zapytaj Teraz

"*" oznacza pola wymagane

*
Chcielibyśmy pozostać w kontakcie z istotnymi informacjami, które naszym zdaniem mogłyby Cię zainteresować? Zobacz naszą politykę prywatności tutaj, aby uzyskać więcej szczegółów.*

Więcej szczegółów znajdziesz w naszej Polityka prywatności.

Masz pytanie lub potrzebujesz pomocy w wyborze odpowiednich produktów do swojego kolejnego projektu? Skontaktuj się z nami, a nasz zespół ekspertów udzieli Ci spersonalizowanej porady i wsparcia technicznego.

Gripple Sp. z o.o.

Skontaktuj się z dedykowanym zespołem ds. sprzedaży i wsparcia dystrybutorów w Polsce.