UniGrip – Phenolic Adaptor Push-Fit Duct Hanger

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Safe Working Load:

Safe Working Load::

15 kg

Wire Compatibility:

Wire Compatibility: :

2.00 mm

Suspension Drop Lengths:

Suspension Drop Lengths::

1 – 10m (additional lengths available on request)

Anfrage absenden

Produkt-Downloads

UniGrip Phenolic Adaptor Technical Data Pack - ENGUniGrip - Lloyds Approval
Alle Downloads anzeigen
UniGrip – Phenolic Adaptor Push-Fit Duct Hanger
SKU # UG*-PA
1
1
1
1

Purpose-Built for Phenolic and PIR Ductwork

UniGrip Phenolic Adaptor is designed specifically for attaching to phenolic and PIR fabricated rectangular ductwork.

Its push-fit design enables fast, tool-free installation directly into the duct surface or bracket, making it ideal for tight timelines and clean installs.

It also supports vapour sealing using aluminium tape, ensuring airtight performance where needed.

When you’re working on ductwork, UniGrip Phenolic Adaptor delivers a reliable, easy-to-install suspension solution.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

How it Works:

See how our UniGrip Phenolic Adaptor works below or Technisches Datenblatt downloaden for full installation guidance.

 UniGrip Phenolic Adaptor Technical Data Pack – ENG
1, Push-fit each fixing directly into the duct.
2. Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side, leaving at least 100mm. This then grips and locks the wire in place.
3. Push down the end cap to allow adjustment up and down the wire.
4. Screw down the top end cap to prevent accidental adjustment once installed.

Montagefertiges Abhängeset

We supply UniGrip Phenolic Adaptor hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substratbefestigung (Endbefestigung)

Alle unsere Abhängesets werden mit einer großen Auswahl an Befestigungen für unterschiedliche Untergründe und Befestigungspunkte geliefert. Entdecken Sie unten, welche Befestigungen für dieses Produkt verfügbar sind

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Öse/Lasche 45º (EO45)

Zur seitlichen Befestigung an Holz, Stahl oder Beton. Ideal für schräge Anwendungen. Einsetzbar für Drahtseilhalter Nr. 2 bis Nr. 3 mit einem Sicherheitsfaktor von bis zu 5:1.

Sichere Arbeitslast: 110 kg
Available Sizes:
No.2: 2 mm (Drahtdurchmesser)
No.3: 3 mm (Drahtdurchmesser)

*System working load based on product and substrate fixing combined

View Endungen

Öse/Lasche 90º (EO90)

Zur Befestigung an Holz, Stahl oder Beton. Einsetzbar für Drahtseilhalter Nr.1, Nr. 2 und Nr. 3 mit einem Sicherheitsfaktor von bis zu 5:1

Sichere Arbeitslast: 110 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesse)
No.2: 2 mm (Drahtdurchmesse)
No.3: 3 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Betondeckenanker (CA)

Ideal für die Befestigung von Gripple Abhängesystemen in Beton.

Sichere Arbeitslast: 45 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesser)
No.2: 2 mm (Drahtdurchmesser)

*System working load based on product and substrate fixing combined

View Endungen

Schiebemutter zur Schienenverankerung (ER8)

Speziell zur Installation in vormontierten Tragschienen zur Befestigung aller Gebäudeversorgungssysteme. Besonders geeignet mit dem UniGrip Sortiment zur mehrstufigen Installation.

Sichere Arbeitslast: 250 kg
Available Sizes:
No.2: 2 mm (Drahtdurchmesse)
No.3: 3 mm (Drahtdurchmesse)
No.4: 4.75 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Schlaufe (FR)

Ideales Befestigungselement zum Umschlingen von Pfetten, Balken, Dachstühlen und anderen Trägerkonstruktionen.

Sichere Arbeitslast: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Endungen

MF Wedge

For the suspension of services from Metfloor® 60 and 80 profiles manufactured by Composite Metal Flooring

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Bolzensetzgerät (DX, CG)

Zum Einsatz mit Bolzensetzgeräten mit vormontierten Endungen zur sicheren Befestigung in Beton oder Verbundmetalldach.

Sichere Arbeitslast: 15 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesse)
No.2: 2 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Endung Gewinde (EF6, EF8, EF10)

Zur Befestigung in Beton- und Verbunddecken

Sichere Arbeitslast: 250 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesse)
No.2: 2 mm (Drahtdurchmesse)
No.3: 3 mm (Drahtdurchmesse)
No.4: 4.75 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Öse/Lasche Gerade (EO)

Ideal zur seitlichen Befestigung in Holz, Blech oder Beton mit Schrauben (siehe Zubehör). Einsetzbar für Drahtseilhalter Nr. 1 bis Nr. 3 mit einem Sicherheitsfaktor von bis zu 5:1

Sichere Arbeitslast: 110 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesse)
No.2: 2 mm (Drahtdurchmesse)
No.3: 3 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Queranker (SP)

Ideal zur Befestigung in Hohlkörpern oder zur Leuchtenabsicherung.

Sichere Arbeitslast: 110 kg
Available Sizes:
No.1: 1.5 mm (Drahtdurchmesse)
No.2: 2 mm (Drahtdurchmesse
No.3: 3 mm (Drahtdurchmesse)

*System working load based on product and substrate fixing combined

View Endungen

Twist Clip

Ideal for hanging from suspended ceiling T-Bar, signage, acoustic baffles or luminaires.

Safe Working Load: Refer to hanger load ratings and safe working loads
Available Sizes:
No.1: 1.5 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Endungen

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Endungen

2 Seillänge

Von 1–10 m

(Weitere Längen auf Anfrage erhältlich)

Alle unsere montagefertigen Abhängesets enthalten ein vorgeschnittenes, geschlauftertes und verpresstes Seil in der von Ihnen gewählten Länge. Standardlängen sind von 1 bis 10 m erhältlich.

3

UniGrip Phenolic Adaptor

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

  • Safe Working Load: 15 kg
  • Wire Compatibility: 2.00 mm
  • Suspension Drop Lengths: 1 – 10m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertTechnischen Support anfragen
1
1
1
1

UniGrip – Phenolic Adaptor

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Key Specifications

Safe Working Load:: 15 kg
Wire Compatibility: : 2.00 mm
Suspension Drop Lengths:: 1 – 10m (additional lengths available on request)

Available Sizes

No. 2: 15 kg
Find a SupplierView Product Page

Produkt-Downloads

UniGrip Phenolic Adaptor Technical Data Pack – ENGUniGrip – Lloyds Approval

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertFind a Stockist

Verwandte Downloads

UniGrip – Lloyds Approval
UniGrip Range Technical Data Pack – ENG

Häufige Anwendungen

Ductwork Suspension

Ductwork Suspension

Related Products

Seilschneider

Spezialwerkzeug zum Durchtrennen von Drahtseilen aus verzinktem Stahl und Edelstahl. Kein Aufspleißen der Drahtseilenden.

View Zubehör

UniGrip Y-Fit

Drahtseilabhänger mit zwei Befestigungspunkten

Maximale Arbeitslast: 110 kg
Schenkellängenbereich: 150 mm bis 500 mm
Maximale seitliche Abweichung: 15º
View Befestigungsvarianten

UniGrip – Standard

Wire Suspension for Slotted Channel or Strut

Max Working Load: 250 kg
Wire Compatibility: 2 mm, 3 mm and 4.75 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Befestigungsvarianten

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Befestigungsvarianten

UniGrip – Cable Basket Adaptor

Direct-fix Cable Basket Hanger

Max Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Befestigungsvarianten

UniGrip – Calibra

UniGrip Calibra | Height Adjustable Hook Fixing Hanger

Safe Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Befestigungsvarianten

UniGrip – Central Exit

Trapeze Bracket Wire Hanger

Max Working Load: 360 kg
Wire Compatibility: 2, 3, 4.75 and 6 mm
Suspension Drop Length: 1 – 10 m (additional drops available on request)
View Befestigungsvarianten

Trapeze Plus FR – Range

Fire Rated Cable Hanger Tested to F120

Max Working Load: 225 kg
Fire Testing: BRE tested to F120
Available Drop Lengths: 1 – 10 m (bespoke lengths available on request)
Produkt anzeigen

Kontaktieren Sie die Gripple-Experten.

„*“ zeigt erforderliche Felder an

Name*
Wir würden Sie gerne über relevante Informationen informieren, von denen wir glauben, dass sie für Sie von Interesse sind.*

Weitere Einzelheiten finden Sie in unserer Datenschutzrichtlinie hier.

Haben Sie eine Frage oder benötigen Sie Hilfe bei der Auswahl der richtigen Produkte für Ihr nächstes Projekt? Kontaktieren Sie uns – unser Expertenteam berät Sie gerne individuell und bietet Ihnen technischen Support.

Gripple GmbH

Kontaktieren Sie unser spezialisiertes Vertriebs- und Händlerbetreuungsteam in Deutschland.