Wire Catenary Suspension

Our catenary suspension systems offer a fast, secure and flexible way to span open spaces with tensioned wire. Ideal for supporting signage, lighting or cable runs.

Our Gripple wire joining technology makes installing catenary systems faster and easier than ever

Our catenary systems are designed to make suspended installations simple. A catenary wire spans between two anchor points to create a secure, tensioned line from which multiple services can be suspended including lighting, signage or electrical cabling.

Our wire rope catenary kits can be joined and tensioned using our innovative Gripple wire joining technology, offering a faster, safer and more efficient alternative to traditional methods using U-bolts and turnbuckles. With pre-engineered components, tool-free joiners and fast tensioning technology, our kits reduce install time. All products are tested and come with approved working loads with a 5:1 safety factor for complete peace of mind.

Whether you’re working on a retail fit-out, an exhibition space, or a large industrial warehouse, our overhead catenary systems are trusted to support a wide range of loads with minimal visual impact. They also give you the flexibility to suspend at angles up to 60 degrees, providing more creative freedom and allowing for suspension in constrained spaces.

Along with the catenary line itself we also offer a full range of catenary hangers and accessories allowing for quick attachment of lighting, AV equipment, cables and displays.

As pioneers in wire suspension, we also back every catenary suspension system with full technical and engineering support including engineering drawings, design advice, take-offs, site inspections and training.

Weiterlesen

Max Load Rating (overhead suspension)

Up to 100 kg vertical load per free span

Max Load Rating (ground level cable management)

1750 kg

Wire Sizes

3 – 6 mm

Produkte filtern

Product Category
Alle Filter löschen

Browse All Products

Es werden 9 von 13 angezeigt

SwiftLine Gabelkragen

OLE Kopplungs- und Terminationsmethode


Dauerlastkapazität: 5000 kg (kein Ausfall)
Oberleitungsdrahtakzeptanz: 9.0 mm – 12.5 mm
Kontaktdrahtakzeptanz: 10.8 mm – 13.2 mm

SwiftLine Rail Jumper

OLE Parallel Groove (PG) Jumper Clamp


Catenary Wire Compatibility: 10.6 mm
Contact Wire Compatibility: 10.6 mm
Max. Pull Test Performance: >180 kg

Solar Einzel-Kabelträger

Kabelträger für PV-Anlagen


Maximale Arbeitslast: 30 kg
Lebensdauer: 30 years
Arbeitstemperatur: -40°C bis +90°C

SwiftLine Rail Dropper

Fully Conductive OLE Dropper


Catenary Wire Compatibility: 9 mm – 16 mm
Contact Wire Compatibility: 5.5 mm – 7.1 mm
Average Pull Test Force: 354 kgf (avg)

Solar Mini Kabelträger

String Cable Hangers


Max Working Load: 22 kg
Design Life: 30 years
Compatability: Up to 50x 6mm2 (10 AWG) cables

Solar Messenger Bracket

Cable Management Support Brackets


Max Working Load: 453 kg
Design Life: 30 years
Compatability: Solar Messenger Kit (String & Standard)

Solar – Abspannset

Spannseilsystem für das Kabelmanagement


Maximale Bruchlast: 2,200 kg
Lebensdauer: 30+ Jahre
Arbeitstemperatur: -20 °C bis +70 °C

Solar Doppel-Kabelträger

Leistungsstarker Träger für das Kabelmanagement


Maximale Arbeitslast: 30 kg | 50 Pfund
Lebensdauer: 30+ Jahre
Arbeitstemperatur: -40°C bis +90°C

Fibre Cable Kit

External Cable Support Solution


Safe Working Load: 90 kg
Installation Torque Setting: 5Nm – 12 Nm
Wire Compatibility: 3 mmØ

Von Experten empfohlen

„The pitched roof posed some challenges (for suspension). Gripple supplied their catenary system which has been fantastic…it’s saved a huge amount of time, and the slick installation has proved really positive for us.”
Darren Havard, Senior Project Manager | Imtech
„With easy and efficient installation and reliable and consistent support from Gripple, the Cable Management system was the obvious choice. It allowed us to easily manage cables above ground. The Gripple technical team were on hand every step of the way to offer support and assistance.”
Claudio Bessone, Program Manager | Infratec

Catenary Analysis and Design Support

While catenary solutions can often feel complex or daunting, our in-house Technical Services team takes care of the full design and specification process, giving you complete confidence in your project.

We provide computer-modelled catenary tension analysis using SCIA Engineer software, calculating final catenary sag and, more importantly, anchor point loading.

Mehr entdecken Here
gripple gripple

Verwandte Produkte und Zubehör

Catenary Steel Anchor

Ideal for blind fixing into one side of a steel beam or for creating an intermediate suspension point in catenary applications.

Großer Seilschneider

Spezialwerkzeug zum Durchtrennen von Drahtseilen aus verzinktem Stahl und Edelstahl. Kein Aufspleißen der Drahtseilenden.

Ringschraube Höhenverstellbar

Zur Befestigung von Kühlraumpaneelen.

Seilschneider

Spezialwerkzeug zum Durchtrennen von Drahtseilen aus verzinktem Stahl und Edelstahl. Kein Aufspleißen der Drahtseilenden.

Wandbefestigung für CTI

Ideal zur Befestigung von CTI und EP Überspannungen an Beton- bzw. Holzwänden.

Metall-Spannzange

Die Metall-Spannzange ist stark, robust und spannt Drähte mit bis zu 6 mm Stärke. Zur Verwendung mit den Gripple Drahtspannern.

Trägerklemmen für CTI

Die Trägerklemme ermöglicht ein einfaches und werkzeugloses Befestigen des CTI am Stahlträger.

Spannzange

Die leichte und robuste Spannzange mit integriertem Spannungsmesser ist ideal zur Spannung von Gripple Systemen mit bis zu 6 mm Stärke.

Häufig gestellte Fragen

Yes. Our cable catenary kits are ideal for suspending cable tray, cable basket, and conduit where no fixed ceiling points exist. Use alongside our range of wire suspension products to hang cables either using a trapeze bracket or our wire rope Y-Fit hangers.

Our catenary kits can be tensioned quickly using our Gripple Torq Tensioning Tool, no specialist rigging equipment is required. It’s lightweight, compact and simple to use on-site.

Yes. Thanks to our “quarter-turn” technology our droppers and hangers can be installed, adjusted or repositioned at any time without needing to cut or re-tension the wire perfect for changes during install or future rework.

Yes. Our in-house technical engineer team can provide layout drawings, tension calculations, as well as full project take-offs to support installation. Giving you the confidence you have the right system for your site.

We provide a full range of catenary end fixings to allow suspended spans to be created between masonry walls, steel I-beams or other structures. Our in house engineering team is on hand to provide expert advice and support if needed to ensure you’re suspension is correct and meets all regional specifications and load requirements.

Yes, we offer ready-to-use catenary kits that include wire rope, fixings and tensioners, available in standard lengths. We can also provide project-specific kits based on an engineering take-off.

Kontaktieren Sie die Gripple-Experten.

*“ zeigt erforderliche Felder an

Name*
Wir würden Sie gerne über relevante Informationen informieren, von denen wir glauben, dass sie für Sie von Interesse sind.*

Weitere Einzelheiten finden Sie in unserer Datenschutzrichtlinie hier.

Haben Sie eine Frage oder benötigen Sie Hilfe bei der Auswahl der richtigen Produkte für Ihr nächstes Projekt? Kontaktieren Sie uns – unser Expertenteam berät Sie gerne individuell und bietet Ihnen technischen Support.

Gripple GmbH

Kontaktieren Sie unser spezialisiertes Vertriebs- und Händlerbetreuungsteam in Deutschland.