UniGrip – Hook Hook Attachment Wire Hanger

SKU # UGP

UniGrip Hook is the fast-attach suspension solution with a pre-fitted snap hook for effortless connection to suspended equipment or eyebolts.

Safe Working Load:

55 kg

Wire Compatibility:

2.00 mm

Suspension Drop Lengths:

1 – 10 m (additional drops available on request)

Anfrage absenden

Produkt-Downloads

UniGrip Hook Technical Data Pack - ENG UniGrip - Lloyds Approval

Alle Downloads anzeigen

UniGrip – Hook Hook Attachment Wire Hanger

SKU # UGP

Fast, Tool-Free Wire Suspension, Hooked on Speed and Simplicity

UniGrip Hook is designed for quick, tool-free suspension where speed and simplicity matter most.

Supplied with a pre-fitted snap hook, it allows instant attachment to eyebolts or holes on suspended equipment, ideal for HVAC units, lighting, or containment systems.

With no tools required and a compact, ready-to-use design, UniGrip Hook reduces installation time and complexity on site. Rated for loads up to 55 kg, it delivers the strength and reliability you expect from Gripple, with the convenience of a plug-and-play solution.

When you need a fast, secure connection from wire to equipment, UniGrip Hook is the smart choice

Quick Snap Hook Fixing

Attach to eyebolts or holes tool free using the pre-attached snap hook fixing point.

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

High Quality UK Manufacturing

Designed, engineered and manufactured in the UK to the highest standards, delivering reliable performance every time.

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Quick Snap Hook Fixing

Attach to eyebolts or holes tool free using the pre-attached snap hook fixing point.

Speed and Convenience

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

High Quality UK Manufacturing

Designed, engineered and manufactured in the UK to the highest standards, delivering reliable performance every time.

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

How it Works:

See how our UniGrip Hook works below or Technisches Datenblatt downloaden for full installation guidance.

UniGrip Hook Technical Data Pack – ENG

Step 1. Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side. This then grips and locks the wire in place.

Step 2. Use the snap hook fixing to attach the hanger to your suspended item or service.

Step 3. Push down the end cap to allow adjustment up and down the wire.

Step 4. Screw down the top end cap to prevent accidental adjustment once installed.

Montagefertiges Abhängeset

We supply UniGrip Hook hangers as a ready to install suspension kit comprised of three parts.

Your Substrate Fixing

Pre-cut and Fused Wire

Your Hanger

1 Substratbefestigung (Endbefestigung)

Alle unsere Abhängesets werden mit einer großen Auswahl an Befestigungen für unterschiedliche Untergründe und Befestigungspunkte geliefert. Entdecken Sie unten, welche Befestigungen für dieses Produkt verfügbar sind

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg

Available Sizes:

No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

UniGrip – Hook Hook Attachment Wire Hanger

Safe Working Load:

Wire Compatibility:

Suspension Drop Lengths:

Produkt-Downloads

Fast, Tool-Free Wire Suspension, Hooked on Speed and Simplicity

Quick Snap Hook Fixing

Speed and Convenience

Technical and Engineering Support

Lockable Adjustment

High Quality UK Manufacturing

Improved Health and Safety

Quick Snap Hook Fixing

Speed and Convenience

Technical and Engineering Support

Lockable Adjustment

High Quality UK Manufacturing

Improved Health and Safety

How it Works:

Montagefertiges Abhängeset

1 Substratbefestigung (Endbefestigung)

18mm Decking Wedge

Barrel

Top Hat

25mm Decking Wedge

Öse/Lasche 45º (EO45)

Öse/Lasche 90º (EO90)

Alphawedge

Betondeckenanker (CA)

Schiebemutter zur Schienenverankerung (ER8)

Schlaufe (FR)

MF Wedge

Multiwedge 2

Bolzensetzgerät (DX, CG)

Endung Gewinde (EF6, EF8, EF10)

Öse/Lasche Gerade (EO)

Queranker (SP)

Twist Clip

TR60 Wedge

Snap Hook

2 Seillänge

UniGrip Hook

UniGrip – Hook

Key Specifications

Available Sizes

Produkt-Downloads

Häufige Anwendungen

HVAC Equipment

Cable Containment

Ductwork Suspension

Combined Service Modules

Exhibition Rigging

HVAC Equipment

Cable Containment

Ductwork Suspension

Combined Service Modules

Exhibition Rigging

Verwandte Downloads

Related Products

Seilschneider

UniGrip Y-Fit

UniGrip – Standard

UniGrip – Calibra

UniGrip – Range

Trapeze Plus FR – Range

Catenary Kit (Indoor)

Entdecken Sie unser Wissensportal

Kontaktieren Sie die Gripple-Experten.