UniGrip Y-Fit Wire Hanger with Dual Fixing Points

SKU # UG2-Y, UG3-Y

Designed specifically for lighting and containment, with dual fixing points for balance. Quick installation and high load capacity.

Max Working Load

Max Working Load:

110 kg

Leg Length Size Range

Leg Length Size Range:

150 mm - 500 mm

Maximum Off Axis Suspension

Maximum Off Axis Suspension:

15º

Enquire Now

Product Downloads

UniGrip Y-Fit - Technical Data Pack - ENGUniGrip Range Technical Data Pack - ENG
View all downloads
UniGrip Y-Fit Wire Hanger with Dual Fixing Points
SKU # UG2-Y, UG3-Y
1
1
1
1

Rapid Installation of Cable Containment and Lighting

Our UniGrip Y-Fit is a versatile and ready-to-use wire rope suspension system engineered for quick, secure installations of lighting and cable containment. With twin fixing points for perfect balance and stability, it delivers a professional finish every time.

Its ergonomic design allows for rapid height adjustment, while the integral button doubles as both release and lock, enhancing safety on-site.

Designed to save time without compromising strength, the Y-Fit is available with multiple leg lengths and end fixings to suit various configurations. With a maximum safe working load of up to 110 kg (using the No. 3 size) and a 5:1 safety factor, it’s the go-to solution for installers seeking efficiency and reliability in overhead electrical suspension projects.

Read More
Strong

Strong

High load rating of up to 110 kg with 5:1 SWL.

Quick

Quick

Up to 6x quicker install than traditional rod and strut method.

Specifically Engineered for Level Hanging

Specifically Engineered for Level Hanging

UniGrip Y-Fit has two suspension points to ensure balance.

Technical Support

Technical Support

Our expert in-house team is on hand to offer site-specific advice and support.

Secure

Secure

For extra peace of mind, the UniGrip button acts as a locking screw and indicates that the wire is locked in the correct position.

Compatibility

Compatibility

UniGrip Y-Fit can be configured with a variety of leg lengths and wire end fixings to suit a wide range of applications.

Strong

Strong

High load rating of up to 110 kg with 5:1 SWL.

Quick

Quick

Up to 6x quicker install than traditional rod and strut method.

Specifically Engineered for Level Hanging

Specifically Engineered for Level Hanging

UniGrip Y-Fit has two suspension points to ensure balance.

Technical Support

Technical Support

Our expert in-house team is on hand to offer site-specific advice and support.

Secure

Secure

For extra peace of mind, the UniGrip button acts as a locking screw and indicates that the wire is locked in the correct position.

Compatibility

Compatibility

UniGrip Y-Fit can be configured with a variety of leg lengths and wire end fixings to suit a wide range of applications.

Range Variants

Our UniGrip Y-Fit Variant is available in sizes 2 and 3.

No. 2 No. 3
Load Rating 55 kg 110 kg
Safety Factor 5:1 5:1

How it works:

See how our UniGrip Y-Fit works below or download the technical data pack for full install guidance.

 UniGrip Y-Fit – Technical Data Pack – ENG
Step 1: Thread the wire through the hole in the plastic cap of the hanger.
Step 2: Attach the dual wire end fixings to the object’s fixing point.
Step 3: Once at the desired position, use an Allen key to lock the wire into place.
Step 4: Twist the end cap downwards to lock the UniGrip.
Step 5: Repeat as necessary.

Ready To Install
Suspension Kit

We supply UniGrip hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

45° Eyelet

For attachment to a variety of substrates using suitable fixings.

Safe Working Load: 110 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Loop

Hanger using a non-invasive, simple, choke knot technique

Safe Working Load: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

MF Wedge

For the suspension of services from Metfloor® 60 and 80 profiles manufactured by Composite Metal Flooring

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Straight Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Stud

Ideal for anchoring into concrete ceilings.

Safe Working Load: 250 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Toggle

For fastening through profile roof cladding, light fittings and other cavities.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

TR60 Wedge

Ideal for the suspension of services from Structural Metal Decks TR60+ and TR80+

Safe Working Load: 90 kg
Available Sizes:
No. 2: 2 mm (Wire Diameter)
No. 3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ring Anchor

Set directly into cracked or non-cracked concrete with a hammer. Ideal for the fast suspension of services including electrical, HVAC and pipework.

Max Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2 : 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Max Safe Working Load: 45 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Shotfire

A shot-fired hanger solution with pre-mounted nail end fixing, for securing installation into concrete or composite metal decking.

Safe Working Load: 15 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

2 Wire Length

From 1 – 10 m

(Other lengths available on request)

All our ready‑to‑install suspension kits include pre‑cut, looped, and fused wire in your chosen length. Standard options are available from 1 – 10 m.

3

UniGrip Y-Fit Hanger

Designed specifically for lighting and containment, with dual fixing points for balance. Quick installation and high load capacity.

  • Max Working Load: 110 kg
  • Wire Compatibility: 2 and 3 mm
  • Leg Length Size Range: 150 mm – 500 mm

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1

UniGrip Y-Fit

SKU # UG2-Y, UG3-Y

Designed specifically for lighting and containment, with dual fixing points for balance. Quick installation and high load capacity.

Key Specifications

Max Working Load: 110 kg
Leg Length Size Range: 150 mm – 500 mm
Maximum Off Axis Suspension: 15º

Available Sizes

No.2: 55 kg
No.3: 110 kg
Find a SupplierView Product Page

Product Downloads

UniGrip Y-Fit – Technical Data Pack – ENGUniGrip Range Technical Data Pack – ENG

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertGet Technical Support

Related Products & Accessories

Drop-In Anchor

Punch-activated Drop-In Anchor for fixing into cracked and non-cracked concrete, and hollow core ceiling slabs.

View Accessory

Small Wire Cutters

Ideal for cutting wire rope construction 7×7 or 7×19 from diameter 1.5 mm up to 6 mm.

View Accessory

Y-Fit Accessory

Accessory ideal for balanced containment, lighting and pipework.

View Accessory

Angel™ Hanger – Y-Fit Adjustable

Adjustable Dual Attachment Hanger

Safe Working Load: 15 kg
Wire: 1.5 mm steel, fused end
Safety Factor: 5:1
View Fixing Variant

Common Applications

Cable Containment

Lighting Suspension

Cable Containment

Lighting Suspension

Related Downloads

UniGrip Y-Fit – Technical Data Pack – ENG
UniGrip Range Technical Data Pack – ENG
UniGrip – Lloyds Approval

Frequently Asked Questions

The UniGrip Y-Fit has a maximum safe working load of up to 110 kg when using the No. 3 size, with a built-in 5:1 safety factor for added peace of mind.

Due to the dual suspension point for added balance, the UniGrip Y-Fit is ideal for suspending lighting and cable trays, offering quick installation and a clean, balanced finish.

Yes, we offer the UniGrip Y-Fit with multiple end fixings and wire rope leg lengths to suit a wide range of ceiling types and installation needs.

Contact the Gripple Experts

Enquire Now

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

UK Sales

Contact dedicated UK sales and distributor support team.

HQ & Export Sales

Contact our UK head office and export sales team.

Technical Support

Contact our UK technical team for project or product advice or support.