UniGrip – Side Exit Direct Equipment Suspension

SKU # UGSE

UniGrip Side Exit is the compact suspension solution designed for direct connection to equipment or brackets using a flange/hex nut. Ideal for mechanical and single pipe supports.

Max Working Load

Max Working Load:

360 kg

Wire Compatibility:

Wire Compatibility::

2 mm, 3 mm and 6 mm

Suspension Drop Lengths

Suspension Drop Lengths:

1 – 10 m (additional drops available on request)

Enquire Now

Pobieranie produktów

UniGrip Side Exit - Technical Data Pack - ENG
Wyświetl wszystkie pliki do pobrania
UniGrip – Side Exit Direct Equipment Suspension
SKU # UGSE
1
1
1
1
1

Wire Rope Suspension for Direct Connection To Equipment

UniGrip Side Exit is engineered for applications where space is tight and precision matters. Designed to connect directly to equipment via a blind tapped hole or through a bracket, it’s ideal for hanging equipment and single pipework supports.

Supplied with a flange or hex nut, installation is quick, secure and simple to carry out. Its side-exit wire path allows for attachment directly to equipment, while still allowing for adjustability if needed.

Available in three load-rated sizes, 55 kg, 110 kg and 360 kg our UniGrip Side Exit hanger delivers a clean, efficient alternative to traditional hanging methods. When direct connection is key, trust Gripple’s side-exit solution for smarter suspension.

Dowiedz się więcej
Direct Attachment

Direct Attachment

UniGrip Side Exit connects directly to equipment using an M8 thread fixing. Plus, with a side wire exit, you can still adjust even after installation.

High Working Loads

High Working Loads

With safe working loads up to 360 kg per suspension point, UniGrip is ideal for heavy duty suspension projects.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods, even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Direct Attachment

Direct Attachment

UniGrip Side Exit connects directly to equipment using an M8 thread fixing. Plus, with a side wire exit, you can still adjust even after installation.

High Working Loads

High Working Loads

With safe working loads up to 360 kg per suspension point, UniGrip is ideal for heavy duty suspension projects.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods, even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Range Variants

UniGrip Side Exit comes in three size variants, allowing for suspension of a range of services. See a breakdown of key performance data in the table or download the Technical Data Packs for full specification information.

UniGrip Side Exit – Technical Data Pack – ENG
Load Rating Safety Factor Wire Size
UniGrip 2 55 kg 5:1 2.0 mm
UniGrip 3 110 kg 5:1 3.0 mm
UniGrip 6 360 kg 5:1 6.0 mm

Zestaw zawieszenia gotowy do montażu

We supply UniGrip Side Exit hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Mocowanie podłoża (mocowanie końcowe)

Wszystkie nasze zestawy zawieszeń są wyposażone w szeroką gamę mocowań do podłoża, zaprojektowanych do pracy z różnymi rodzajami podłoży i punktów mocowania. Poniżej znajdą Państwo dostępne mocowania do tego produktu:

Oczko 45° (EO45)

Do zastosowania w wielu typach podłoży przy użyciu odpowiednich mocowań. Idealne do systemów naciągających.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko 90° (EO90)

Zakończenie krańcowe systemu linowego Gripple EO90 do mocowania na różnych podłożach za pomocą odpowiednich śrub / kotw.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnica drutu)
No.2: 2 mm (Średnica drutu)
No.3: 3 mm (Średnica drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pętla (FR)

Idealny do owinięcia pętli wokół płatwi, belek, wiązarów dachowych i innych odpowiednich elementów konstrukcyjnych.

Bezpieczne obciążenie robocze: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko (EO)

Montaż do rożnego rodzaju podłoża przy pomocy odpowiednich elementów montażowych.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pręt Gwintowany (EF6, EF8, EF10)

Zawiesie linowe Gripple z zakończeniem typu śruba przystosowane do kotwienia w sufitach betonowych, pokryciach metalowych, oraz innych podłożach gdzie można zamocować się śrubą.

Bezpieczne obciążenie robocze: 250 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)
No.4: 4.75 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

TR60 Wedge

Ideal for the suspension of services from Structural Metal Decks TR60+ and TR80+

Safe Working Load: 90 kg
Available Sizes:
No. 2: 2 mm (Wire Diameter)
No. 3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Hak oczkowy do betonu spękanego (RA)

Montaż bezpośrednio w betonie przy pomocy młotka. Idealny do szybkiego zawieszenia instalacji, systemów HVAC oraz innych elementów.

Bezpieczne obciążenie robocze: 55 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2 : 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa do Sufitu (CA)

Idealna do mocowanie produktów Gripple do betonu.

Bezpieczne obciążenie robocze: 45 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa wstrzeliwana (DX, CG)

Opatentowane mocowanie krańcowe wieszaka Gripple ze wstępnie zamontowanym uchwytem końcówki gwoździa do montażu w betonie lub innym podłożu przystosowanym do techniki wstrzeliwanej.

Bezpieczne obciążenie robocze: 15 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa przelotowa (SP)

Zakończenie krńcowe toggle systemu linowego Gripple doskonale nadaje się do poszyć dachowych, opraw oświetleniowych i innych wnęk

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutur)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

2 Długość linki

Od 1 do 10 m

(inne długości dostępne na życzenie)

Wszystkie nasze zestawy zawieszeń gotowe do montażu zawierają wstępnie przyciętą, zapętloną i zaprasowaną linkę w wybranej długości. Standardowe długości to 1–10 m.

3

UniGrip Side Exit

UniGrip Side Exit 

Designed for use connecting directly to equipment via a blind tapped hole or through a bracket.

It is supplied with a flange/hex nut for easy attachment.

It can also be used for single pipework supports (mechanical).

  • Max Working Load: 360 kg
  • Wire Compatibility: 2 mm, 3 mm and 6 mm
  • Suspension Drop Lengths: 1 – 10 m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1
1

UniGrip – Side Exit

SKU # UGSE

UniGrip Side Exit is the compact suspension solution designed for direct connection to equipment or brackets using a flange/hex nut. Ideal for mechanical and single pipe supports.

Key Specifications

Max Working Load: 360 kg
Wire Compatibility:: 2 mm, 3 mm and 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)

Available Sizes

No. 2: 55 kg
No. 3 : 110 kg
No. 6 : 360 kg
Find a SupplierView Product Page

Pobieranie produktów

UniGrip Side Exit – Technical Data Pack – ENG

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertZnajdź sprzedawcę

Trusted by the Experts:

“Everything comes pre-cut, ready-to-use, so there’s no cutting on-site – it gets rid of the hot works, gets rid of some of the health and safety issues that we could potentially have.”
Andrew Eland – Construction Manager | Willmott Dixon
Read the full case study here
„Hot works permits and fire watching activities take up a lot of time every day we’re on-site. By using Gripple products, we saved a lot of time as our team didn’t need to prepare hot works permits each morning or wear additional PPE, as all Gripple suspension solutions can be installed quickly and safely without having to cut, file and hot dip each component.”
Stephen Barrett – Project Manager | Morgan Sindall Construction
Read the full case study here

Common Applications

HVAC Equipment

Busbar Suspension

Pipework

Combined Modules

HVAC Equipment

Busbar Suspension

Pipework

Combined Modules

Related Downloads

UniGrip Side Exit – Technical Data Pack – ENG
UniGrip – Lloyds Approval
UniGrip Range Technical Data Pack – ENG
Building Services Product Guide
UniGrip 6 – Technical Data Pack – ENG (CAN)

Related Products

UniGrip – Standard

Wire Suspension for Slotted Channel or Strut

Max Working Load: 250 kg
Wire Compatibility: 2 mm, 3 mm and 4.75 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – Central Exit

Trapeze Bracket Wire Hanger

Max Working Load: 360 kg
Wire Compatibility: 2, 3, 4.75 and 6 mm
Suspension Drop Length: 1 – 10 m (additional drops available on request)
View Wariant mocowania

UniGrip – QT (Quarter Turn)

Inner Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Wariant mocowania

UniGrip – Range

Single Channel Wire Hanger

Maximum Safe Working Load: 360 kg
Wire Compatibility: 1.5 mm to 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
Zobacz produkt

Trapeze Plus FR – Side Exit

Single Channel Suspension Fixing with Side Thread Exit

Max Working Load: 90 kg
Available Drop Lengths: 1 – 10 m (bespoke sizes available on request)
Fire Testing: Externally tested to F120 standards
View Wariant mocowania

Catenary Kit (Indoor)

Overhead Wire Suspension Catenary

Safe Working Load: Up to 100 kg vertical load per free span
Available Wire Sizes: 3 mm, 6 mm
Attachment Methods: Wall Bracket, Loop, I-Beam Clamp
Zobacz produkt

Skontaktuj się z ekspertami Gripple

Zapytaj Teraz

"*" oznacza pola wymagane

*
Chcielibyśmy pozostać w kontakcie z istotnymi informacjami, które naszym zdaniem mogłyby Cię zainteresować? Zobacz naszą politykę prywatności tutaj, aby uzyskać więcej szczegółów.*

Więcej szczegółów znajdziesz w naszej Polityka prywatności.

Masz pytanie lub potrzebujesz pomocy w wyborze odpowiednich produktów do swojego kolejnego projektu? Skontaktuj się z nami, a nasz zespół ekspertów udzieli Ci spersonalizowanej porady i wsparcia technicznego.

Gripple Sp. z o.o.

Skontaktuj się z dedykowanym zespołem ds. sprzedaży i wsparcia dystrybutorów w Polsce.