Angel™ Hanger – Mini Helix Suspension Solution for Acoustic Panels

SKU # AL 1-SHMX

Designed specifically for the fast and secure suspension of polyester fibre and PET acoustic panels.

Safe Working Load

Safe Working Load:

15 kg

Wire Size

Wire Size:

1.5 mm

Safety Factor

Safety Factor:

5:1

Enquire Now

Pobieranie produktów

Angel Mini Helix Technical Data Pack - ENGLighting and Acoustics Brochure - ENG
Wyświetl wszystkie pliki do pobrania
Angel™ Hanger – Mini Helix Suspension Solution for Acoustic Panels
SKU # AL 1-SHMX
1
1
1
1
1

Angel™ Mini Helix – Seamless Suspension, Designed for Precision

Angel™ Mini Helix is a discreet suspension solution purpose-built for lightweight acoustic panels, particularly polyester fibre types.

Compact in design and pre-assembled for speed, it combines reliable acoustic suspension with clean aesthetics, ideal for offices, classrooms, studios, and open-ceiling environments where noise control meets design precision.

Secure Suspension

Secure Suspension

The Mini Helix screw drives directly into polyester fibre acoustic panels, creating a strong, reliable fixing point. It’s fully integrated into the pre-assembled kit, allowing immediate use with no need for extra components.

Effortless Insertion

Effortless Insertion

The hinged helix design acts as a built-in lever, tilting into position for smooth, one-step installation. This makes set-up faster and easier, especially in overhead or confined spaces with no tools required.

Fast & Flexible Installation

Fast & Flexible Installation

Supplied as a pre-wired kit with the helix already attached, Mini Helix saves time on site. The Angel device allows for one-handed height adjustment, while the swivel action helps avoid services and suits angled panels.

Engineered For Strength

Engineered For Strength

Despite its compact form, the Mini Helix supports up to 15 kg SWL with a 5:1 safety factor. Panels must be a minimum of 12 mm thick, ensuring a safe and secure suspension for a wide range of acoustic solutions.

Built for Real-World Use

Built for Real-World Use

Designed to perform in ambient conditions from –20 °C to +70 °C, Mini Helix suits a wide variety of environments. For high-heat or specialist applications, Technical Services can provide tailored advice.

Discreet, Clean Finish

Discreet, Clean Finish

Featuring a 1.5 mm pre-galvanised wire and a low-profile body, Mini Helix stays out of sight once installed. It’s ideal for modern interior spaces where visual clarity and minimal hardware are a design priority.

Secure Suspension

Secure Suspension

The Mini Helix screw drives directly into polyester fibre acoustic panels, creating a strong, reliable fixing point. It’s fully integrated into the pre-assembled kit, allowing immediate use with no need for extra components.

Effortless Insertion

Effortless Insertion

The hinged helix design acts as a built-in lever, tilting into position for smooth, one-step installation. This makes set-up faster and easier, especially in overhead or confined spaces with no tools required.

Fast & Flexible Installation

Fast & Flexible Installation

Supplied as a pre-wired kit with the helix already attached, Mini Helix saves time on site. The Angel device allows for one-handed height adjustment, while the swivel action helps avoid services and suits angled panels.

Engineered For Strength

Engineered For Strength

Despite its compact form, the Mini Helix supports up to 15 kg SWL with a 5:1 safety factor. Panels must be a minimum of 12 mm thick, ensuring a safe and secure suspension for a wide range of acoustic solutions.

Built for Real-World Use

Built for Real-World Use

Designed to perform in ambient conditions from –20 °C to +70 °C, Mini Helix suits a wide variety of environments. For high-heat or specialist applications, Technical Services can provide tailored advice.

Discreet, Clean Finish

Discreet, Clean Finish

Featuring a 1.5 mm pre-galvanised wire and a low-profile body, Mini Helix stays out of sight once installed. It’s ideal for modern interior spaces where visual clarity and minimal hardware are a design priority.

How to Install:

Our Angel Mini Helix Hanger is intuitive and easy to install. For full technical specification, download our technical data pack:

 Angel Mini Helix Technical Data Pack – ENG
Step 1: Using the Hanger body as a lever, twist the screw directly into the acoustic panel.
Step 2: With the hanger upright, feed the wire into the hole at the top of the hangar.
Step 3: Squeeze angel wings to adjust hanger height
Step 4: Repeat as necessary across the panel

Zestaw zawieszenia gotowy do montażu

We supply Angel Mini Helix hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Your Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Mocowanie podłoża (mocowanie końcowe)

Wszystkie nasze zestawy zawieszeń są wyposażone w szeroką gamę mocowań do podłoża, zaprojektowanych do pracy z różnymi rodzajami podłoży i punktów mocowania. Poniżej znajdą Państwo dostępne mocowania do tego produktu:

Twist Clip

Ideal for hanging from suspended ceiling T-Bar, signage, acoustic baffles or luminaires.

Safe Working Load: Refer to hanger load ratings and safe working loads
Available Sizes:
No.1: 1.5 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko 90° (EO90)

Zakończenie krańcowe systemu linowego Gripple EO90 do mocowania na różnych podłożach za pomocą odpowiednich śrub / kotw.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnica drutu)
No.2: 2 mm (Średnica drutu)
No.3: 3 mm (Średnica drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pętla (FR)

Idealny do owinięcia pętli wokół płatwi, belek, wiązarów dachowych i innych odpowiednich elementów konstrukcyjnych.

Bezpieczne obciążenie robocze: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Pręt Gwintowany (EF6, EF8, EF10)

Zawiesie linowe Gripple z zakończeniem typu śruba przystosowane do kotwienia w sufitach betonowych, pokryciach metalowych, oraz innych podłożach gdzie można zamocować się śrubą.

Bezpieczne obciążenie robocze: 250 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)
No.4: 4.75 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa przelotowa (SP)

Zakończenie krńcowe toggle systemu linowego Gripple doskonale nadaje się do poszyć dachowych, opraw oświetleniowych i innych wnęk

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutur)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Oczko (EO)

Montaż do rożnego rodzaju podłoża przy pomocy odpowiednich elementów montażowych.

Bezpieczne obciążenie robocze: 110 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)
No.3: 3 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa wstrzeliwana (DX, CG)

Opatentowane mocowanie krańcowe wieszaka Gripple ze wstępnie zamontowanym uchwytem końcówki gwoździa do montażu w betonie lub innym podłożu przystosowanym do techniki wstrzeliwanej.

Bezpieczne obciążenie robocze: 15 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Hak oczkowy do betonu spękanego (RA)

Montaż bezpośrednio w betonie przy pomocy młotka. Idealny do szybkiego zawieszenia instalacji, systemów HVAC oraz innych elementów.

Bezpieczne obciążenie robocze: 55 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2 : 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Kotwa do Sufitu (CA)

Idealna do mocowanie produktów Gripple do betonu.

Bezpieczne obciążenie robocze: 45 kg
Available Sizes:
No.1: 1.5 mm (Średnice Drutu)
No.2: 2 mm (Średnice Drutu)

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Mini Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load : 15 kg
Available Sizes:
No. 1: 1.5 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Sposób montażu do podłoża

2 Długość linki

Od 1 do 10 m

(inne długości dostępne na życzenie)

Wszystkie nasze zestawy zawieszeń gotowe do montażu zawierają wstępnie przyciętą, zapętloną i zaprasowaną linkę w wybranej długości. Standardowe długości to 1–10 m.

3

Angel Mini Helix

Designed for precision and style, our Angel Hanger range offers a discreet, tool-free solution for single-point wire suspension across a wide range of applications. Angel Mini Helix suspension kits are designed specifically for the fast and secure suspension of polyester fiber and PET acoustic panels.

Max Working Load: 15 kg / 33 lb

Wire: Pre-galvanised, 7×7, 1/16” / 1.5mm diameter

Safety Factor: 5:1

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1
1

Angel™ Hanger – Mini Helix

SKU # AL 1-SHMX

Designed specifically for the fast and secure suspension of polyester fibre and PET acoustic panels.

The Gripple Angel™ Helix Hanger is a sleek, low-profile suspension system designed for fast, secure installation of acoustic panels. The discreet solution can create the illusion of a floating acoustic ceiling.

Ideal for fibreglass and dense foam panels, the Helix locks in place with a simple twist using an Allen key, while the Angel mechanism allows for effortless height adjustment via a spring-loaded button.

The central wire exit variant supports multi-layer configurations, whilst the side exit variant is better suited to single-layer projects. With a 15 kg load rating, it’s built for performance and versatility and for peace of mind, the one-click safety feature reinforces its strength.

Additionally, pre-installation of the helix screw is possible at the point of, leaving just the Angel body to be installed on-site, streamlining workflows and reducing time on the project.

Key Specifications

Safe Working Load: 15 kg
Wire Size: 1.5 mm
Safety Factor: 5:1

Available Sizes

No. 1: 15 kg
Find a SupplierView Product Page

Pobieranie produktów

Angel Mini Helix Technical Data Pack – ENGLighting and Acoustics Brochure – ENG

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertZnajdź sprzedawcę

Applications

Acoustic Suspension

Acoustic Suspension

Related Products

HangPro®

Versatile Adjustable Wire Hanger

Safe Working Load: Up to 55 kg
Safety Factor: 5:1
Wire Compatibility: 1.5 mm / 2 mm
Zobacz produkt

Angel™ Hanger – Helix

Low Profile Hanger for Acoustic Panel Suspension

Safe Working Load: 15 kg
Compatibility: Ideal for panels made from fibreglass and dense foam (minimum thickness of 40 mm)
Versatile: Side and Central wire exit options available
View Wariant mocowania

Angel™ Hanger – Range

Aesthetic Architectural Wire Hanger

Safe Working Load: 15 kg
Range of Fixing Variants (Feet): 30+
Safety Factor: 5:1
Zobacz produkt

HangFast™

Key Release Wire Locking Hanger

Safe Working Load: 325 kg
Wire Compatibility: 1.5 – 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drop lengths available on request)
Zobacz produkt

Catenary Kit (Indoor)

Overhead Wire Suspension Catenary

Safe Working Load: Up to 100 kg vertical load per free span
Available Wire Sizes: 3 mm, 6 mm
Attachment Methods: Wall Bracket, Loop, I-Beam Clamp
Zobacz produkt

Related Downloads

Angel Mini Helix Technical Data Pack – ENG
Angel, UniGrip, Direct Fix Clip, Collier Universal Certificate
Angel – CE Certificate
Angel Range – Technical Data Pack – ENG
Building Services Product Guide

Skontaktuj się z ekspertami Gripple

Zapytaj Teraz

"*" oznacza pola wymagane

*
Chcielibyśmy pozostać w kontakcie z istotnymi informacjami, które naszym zdaniem mogłyby Cię zainteresować? Zobacz naszą politykę prywatności tutaj, aby uzyskać więcej szczegółów.*

Więcej szczegółów znajdziesz w naszej Polityka prywatności.

Masz pytanie lub potrzebujesz pomocy w wyborze odpowiednich produktów do swojego kolejnego projektu? Skontaktuj się z nami, a nasz zespół ekspertów udzieli Ci spersonalizowanej porady i wsparcia technicznego.

Gripple Sp. z o.o.

Skontaktuj się z dedykowanym zespołem ds. sprzedaży i wsparcia dystrybutorów w Polsce.