TecLoc Beam Clamp Seismic Structural Bracing Attachment

SKU # GSBC-125

The TecLoc Beam Clamp is a seismic load-rated solution designed for secure and reliable bracing attachment to beams and bar joists. Built for strength, safety, and speed, it offers contractors a trusted way to meet seismic requirements while streamlining on-site installation.

Flange Capacity

Flange Capacity:

Fits beam flanges up to 1 ¼” thick

Bracing Compatibility

Bracing Compatibility:

0–90° for flexible installation

Strong

Strong:

Supports high LRFD values

Enquire Now

Product Downloads

TecLoc Beam Clamp - Technical Data Pack - USASeismic Force Protection - Brochure - USA
SKU # GSBC-125
1
1
1
1

Secure Seismic Attachment – Fast to Install, Engineered to Perform

The TecLoc Beam Clamp is designed with a single-bolt mechanism to significantly reduce installation time while maintaining high performance standards. Its industry-tested design supports high Load and Resistance Factor Design (LRFD) values, and the shear-off bolt ensures correct torque, allowing for effortless on-site inspection. Compatible with beam flanges up to 1 ¼” thick and adaptable for 0–90° arrangements, the TecLoc Beam Clamp is a versatile, trusted solution for contractors working in seismic zones.

.

Read More
Safe

Safe

Industry tested and approved.

Ease of Use

Ease of Use

Single-bolt design speeds up installation.

Strong

Strong

Supports high Load and Resistance Factor Design values.

Shear-Off-Bolt

Shear-Off-Bolt

Breaks at optimal torque, allowing for easy on-site inspection.

Compatible

Compatible

Fits beam flanges up to 1 1/4” thick.

Adaptable

Adaptable

Performs in 0–90° arrangements.

Safe

Safe

Industry tested and approved.

Ease of Use

Ease of Use

Single-bolt design speeds up installation.

Strong

Strong

Supports high Load and Resistance Factor Design values.

Shear-Off-Bolt

Shear-Off-Bolt

Breaks at optimal torque, allowing for easy on-site inspection.

Compatible

Compatible

Fits beam flanges up to 1 1/4” thick.

Adaptable

Adaptable

Performs in 0–90° arrangements.

How it Works:

Here’s how the TecLoc Beam Clamp works, for more information refer to the Technical Data Pack

 Download the Technical Data Pack
Step 1: Place the clamp on the beam and hand-tighten the bolt (nut and washer stay loose).
Step 2: Use a torque wrench or impact driver to tighten the bolt until the head shears off at 29.5 lb-ft (40 Nm), securing it firmly to the beam.
Step 3: Remove the nut and washer to prepare for the bracing bracket.
Step 4: Attach the bracing bracket underneath the clamp, slide on the washer, then tighten the nut to lock it in place.
Step 5: Installation is complete once the bracket is secured.

“One of the core values we hold at Southland is innovation. With Gripple, their values are right in line with us. They’re constantly trying to provide products that help our installation go better, quicker, safer.”

David Pickett, Site Manager – Southland Industries

Discover the full case study

Common Applications

Ductwork

Pipework

Electrical

Ductwork

Pipework

Electrical

Related Products

TecLoc Cable Bracing Kit

Seismic Bracing Restraint System

Pre-Assembled Kits: 1x fastener, 2x attachment brackets and 1x cable length
Cable Lengths Available: 10 ft, 15 ft & 20 ft
Variants: Available in 4 sizes
View Product

TecLoc Rigid Bracing Brackets

Seismic Bracing Restraint Solution

Versatile: Compatible with up to 1.25” EMT pipe and strut
Rod Compatibility : Retrofit brackets allow for the installation of 3/8” – 3/4″ rod
High Compression Load Capability: up to 5465 lbf* (*Engineering calculations required)
View Product

TecLoc Rod Stiffener Clip

Seismic Connector for Rod & Strut

Bracket Compatibility : Strut and Universal Bracket
Rod Compatibility: 3/8”, 1/2”, 5/8”, 3/4” & 7/8”
High Compression Load Capability: in excess of 2611 lbf* (*Engineering calculations required)
View Product

TecLoc Conduit Claw

Seismic Rod Stiffening Clip for Conduit

Pipe Compatibility: 1” EMT & Schedule 40 Pipe
Rod Compatibility: 3/8”, ½” & 5/8”
High Compression Load Capability: In excess of 1772 lbf* (*Engineering calculations required)
View Product

Frequently Asked Questions

Yes, our TecLoc Beam cLamp has been tested to the ASHRAE 171 standard and has extremely high load capabilities. See our Technical Data Pack for our validated load and angle variances.

Yes, the Beam Clamp has been designed with a 1/2″ bolt to accommodate our TecLoc Cable Bracing Kits and other standard seismic products in the market. Our design and engineering teams can support in aligning compatible brace components on your job.

All of the TecLoc products have been designed to support retrofit installations meaning you can install your service runs and then come back to install the seismic bracing or stiffening after – thus not delaying your timelines.

Contact the Gripple Experts

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

Gripple Inc. USA Head Office

Contact our dedicated USA sales and head office team.

Gripple Inc. West Coast

Contact our West Coast sales office.