TecLoc Rod Stiffener Clip Seismic Connector for Rod & Strut

SKU # RS-CLIP

A universal stiffening clip designed to secure the strut to the rod to protect and prevent the rod from buckling in seismic conditions

Bracket Compatibility

Bracket Compatibility :

Strut and Universal Bracket

Rod Compatibility

Rod Compatibility:

3/8”, ½”, 5/8”, ¾” & 7/8”

High Compression Load Capability

High Compression Load Capability:

in excess of 2611 lbf* (*Engineering calculations required)

Enquire Now

Pobieranie produktów

TecLoc Rod Stiffener Clip - Technical Data Pack
SKU # RS-CLIP
1
1
1
1

The Faster, Safer Way to Secure Strut

 

The TecLoc Seismic Rod Stiffener Clip secures the rod to the strut or our Universal Bracket, creating a stiffening solution within seconds. Our seismic stiffening clip helps reduce total installed cost by streamlining labour and simplifying compliance.

Versatile

Versatile

Designed for universal compatibility with Universal Bracket and strut as well as various threaded rod sizes.

Safe

Safe

Prevents the threaded rod from buckling under seismic conditions.

Strong

Strong

Stiffens the rod by securing to the Universal Bracket or strut.

Versatile

Versatile

Designed for universal compatibility with Universal Bracket and strut as well as various threaded rod sizes.

Safe

Safe

Prevents the threaded rod from buckling under seismic conditions.

Strong

Strong

Stiffens the rod by securing to the Universal Bracket or strut.

How it works:

Installing the TecLoc Rod Stiffener Clip is quick and straightforward by following these simple steps. For full technical specification, download our technical data pack:

 TecLoc Rod Stiffener Clip – Technical Data Pack
Step 1. Position the Universal Bracket or strut around the rod, keeping the rod in the corner.
Step 2. Insert the Rod Stiffener Clip into the bracket or strut.
Step 3. Rotate to lock it into place.
Step 4. Tighten the bolt with an impact driver.
Step 5. Add extra clips as needed and tighten.

Related Products

TecLoc Cable Bracing Kit

Seismic Bracing Restraint System

Pre-Assembled Kits: 1x fastener, 2x attachment brackets and 1x cable length
Cable Lengths Available: 10 ft, 15 ft & 20 ft
Variants: Available in 4 sizes
Zobacz produkt

TecLoc Rigid Bracing Brackets

Seismic Bracing Restraint Solution

Versatile: Compatible with up to 1.25” EMT pipe and strut
Rod Compatibility : Retrofit brackets allow for the installation of 3/8” – ¾” rod
High Compression Load Capability: up to 5465 lbf* (*Engineering calculations required)
Zobacz produkt

Related Applications

Ductwork

Pipework

Electrical

Ductwork

Pipework

Electrical

Frequently Asked Questions

Find out the engineering partner and provide the details to get into their submittals. Often specifies ‘or similar’ on product solutions, so this may be a sensible workaround in the short term.

This will be handled during the engineering, and you would then be advised which drops are seismic and which then need stiffening. At Gripple, we only indicate the drops that require this and don’t offer it as standard.

Skontaktuj się z ekspertami Gripple

Zapytaj Teraz

"*" oznacza pola wymagane

*
Chcielibyśmy pozostać w kontakcie z istotnymi informacjami, które naszym zdaniem mogłyby Cię zainteresować? Zobacz naszą politykę prywatności tutaj, aby uzyskać więcej szczegółów.*

Więcej szczegółów znajdziesz w naszej Polityka prywatności.

Masz pytanie lub potrzebujesz pomocy w wyborze odpowiednich produktów do swojego kolejnego projektu? Skontaktuj się z nami, a nasz zespół ekspertów udzieli Ci spersonalizowanej porady i wsparcia technicznego.

Gripple Sp. z o.o.

Skontaktuj się z dedykowanym zespołem ds. sprzedaży i wsparcia dystrybutorów w Polsce.