Slope Stabilisation and Reinforcement

Terra-Lock® is suitable for a wide range of applications, including cut slopes, embankments as well as shallow and deep plane failures.

Gripple’s system is faster to install, requires no heavy machinery, is less disruptive to the site, and typically more cost-effective than traditional hard-armour or deep anchoring solutions.

Terra-Lock® anchors and pins are compatible with over 60 leading TRM and HP-TRM erosion control matting brands on the market. Contact our technical team for specific compatibility information.

All components are designed to be installed using hand tools, however, some sites may require powered plant machinery to drive anchors depending on soil type. Our engineering team is on hand to provide recommendations based on soil type and even conduct site inspections if required.

Depending on soil type, anchors can provide pull-out forces up to 32 kN. Contact our technical team for engineering support or to arrange a site test.

Yes, our in-house technical team can assist with anchor selection, design recommendations, ground testing guidance, and on-site installation support if required. Contact our technical team for engineering support or to arrange a site test.

Gripple Terra-Lock® can be used for both permanent and temporary stabilisation projects, depending on your requirements.

Because the system can be installed by hand, it’s ideal for remote or difficult-to-access locations where heavy plant access may be limited.

No, once vegetation establishes over the matting, the system becomes virtually invisible, making it ideal for environmentally sensitive or aesthetic landscapes.

All Terra-Lock® products are manufactured in the UK to the highest quality standards.