UniGrip – Calibra UniGrip Calibra | Height Adjustable Hook Fixing Hanger

SKU # UG2-CAL, UG3-CAL, UG4-CAL

Discover UniGrip Calibra, the wire rope suspension system with tool-free hook attachment and under-load adjustability. Precision meets performance.

Safe Working Load

Safe Working Load:

120 lbs / 55 kg

Wire Compatibility

Wire Compatibility:

2 mm

Suspension Drop Lengths

Suspension Drop Lengths:

1 – 10m (additional drops available on request)

Enquire now

Product Downloads

UniGrip - Lloyds ApprovalUniGrip Calibra - Technical Data Pack - ENG
View all downloads
UniGrip – Calibra UniGrip Calibra | Height Adjustable Hook Fixing Hanger
SKU # UG2-CAL, UG3-CAL, UG4-CAL
1

Precision Suspension with Built-In Adjustability

UniGrip Calibra is designed for installers who demand flexibility and control. Featuring a pre-fitted hook for rapid, tool-free connection to eyebolts or suspended equipment, Calibra simplifies even the most complex installations. Its standout feature? A unique inbuilt mechanism that allows up to 35 mm of vertical adjustment while under load, making fine-tuning effortless and safe.

Supplied in compact kits with pre-cut, fused wire rope and your choice of fixings, Calibra is ready to go straight from the box. Whether you’re suspending HVAC units or cable containment, UniGrip Calibra delivers smarter, faster, and more precise suspension every time.

Read More
Fine-tune with confidence

Fine-tune with confidence

UniGrip Calibra’s inbuilt mechanism allows up to 35 mm of vertical adjustment, even while under load—so you can make precise changes without disassembling

Fast, tool-free connection

Fast, tool-free connection

The pre-fitted hook enables instant attachment to eyebolts or suspended equipment, cutting down installation time.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height, and when you're done, just screw down to lock in place and prevent tampering.

Improved health and safety

Improved health and safety

Our wire suspension kits minimise time spent working at height and with power tools, and eliminate the need for hot works permits, helping your teams work safer and stay compliant.

Fine-tune with confidence

Fine-tune with confidence

UniGrip Calibra’s inbuilt mechanism allows up to 35 mm of vertical adjustment, even while under load—so you can make precise changes without disassembling

Fast, tool-free connection

Fast, tool-free connection

The pre-fitted hook enables instant attachment to eyebolts or suspended equipment, cutting down installation time.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height, and when you're done, just screw down to lock in place and prevent tampering.

Improved health and safety

Improved health and safety

Our wire suspension kits minimise time spent working at height and with power tools, and eliminate the need for hot works permits, helping your teams work safer and stay compliant.

How it works:

See how our UniGrip Calibra works below or download the Technical Data Pack for full installation guidance

 UniGrip Calibra – Technical Data Pack – ENG
Step 1: Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side
Step 2: This then grips and locks the wire in place
Step 3: Push down the end cap to allow adjustment up and down the wire
Step 4: Use the hook fixing to connect to your suspended service or item.
Step 5: Fine-tune your suspension height using the M8 thread and adjustment pillar until you reach the desired height.

Ready To Install
Suspension Kit

We supply UniGrip Calibra hangers as a ready to install suspension kit comprised of three parts

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

Loop

Ideal for looping around purlins, beams, roof trusses and other suitable building features.

Safe Working Load: 660 lbs
Available Sizes:
No. 1 : 1/16″
No. 2: 5/64″
No. 3: 1/8″
No. 4: 3/16″
No. 5: 1/4″

*System working load based on product and substrate fixing combined

View Substrate Fixing

Stud

For anchoring into concrete ceilings, metal decking and pressed metal.

Safe Working Load: 250 kg | 550 lbs
Available Sizes:
No.1: 1/16″(Wire Diameter)
No.2: 5/64″ (Wire Diameter)
No.3: 1/8″ (Wire Diameter)
No.4: 3/16″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

45° Eyelet

For attachment to a variety of substrates using suitable fixings.

Safe Working Load: 240 lbs / 110 kg
Available Sizes:
No.2: 5/64″ (Wire Diameter)
No.3: 1/8″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Safe Working Load: 240 lbs / 110 kg
Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2: 5/64″ (Wire Diameter)
No.3: 1/8″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2: 5/64″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Channel Nut

Designed specifically for use with channel, to suspend all types of building services.

Safe Working Load: 250 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ring Anchor

Set directly into cracked or non-cracked concrete with a hammer. Ideal for the fast suspension of services including electrical, HVAC and pipework.

Max Safe Working Load: 55 kg | 120 lbs
Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2 : 5/64″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Shotfire

A shot-fired hanger solution with pre-mounted nail end fixing, for securing installation into concrete or composite metal decking.

Safe Working Load: 15 kg | 33 lbs
Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2: 5/64″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Safe Working Load: 110 kg | 240 lbs
Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2: 5/64″ (Wire Diameter)
No.3: 1/8″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Toggle

For fastening through profile roof cladding, light fittings and other cavities.

Safe Working Load: 110 kg | 240 lbs
Available Sizes:
No.1: 1/16″ (Wire Diameter)
No.2: 5/64″ (Wire Diameter)
No.3: 1/8″ (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 198 lbs | 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 120 lbs | 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

2 Wire Length

From 1 – 10 m

(Other lengths available on request)

All our ready‑to‑install suspension kits include pre‑cut, looped, and fused wire in your chosen length. Standard options are available from 1 – 10 m.

3

UniGrip Calibra

Supplied hook fixing allows quick tool-free attachment to an eyebolt or hole on suspended equipment.

It is designed to allow for up to 35mm of vertical adjustment under load using the inbuilt mechanism.

  • Max Working Load: 120 lb / 55 kg
  • Wire Compatibility: 2.00 mm

Suspension Drop Lengths: 1 – 10m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1

UniGrip – Calibra

SKU # UG2-CAL, UG3-CAL, UG4-CAL

Discover UniGrip Calibra, the wire rope suspension system with tool-free hook attachment and under-load adjustability. Precision meets performance.

UniGrip Calibra is designed for installers who demand flexibility and control. Featuring a pre-fitted hook for rapid, tool-free connection to eyebolts or suspended equipment, Calibra simplifies even the most complex installations. Its standout feature? A unique inbuilt mechanism that allows up to 35 mm of vertical adjustment while under load, making fine-tuning effortless and safe.

Supplied in compact kits with pre-cut, fused wire rope and your choice of fixings, Calibra is ready to go straight from the box. Whether you’re suspending HVAC units or cable containment, UniGrip Calibra delivers smarter, faster, and more precise suspension every time.

Key Specifications

Safe Working Load: 120 lbs / 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)

Available Sizes

No. 2: 120 lb / 55 kg
Find a SupplierView Product Page

Product Downloads

UniGrip – Lloyds ApprovalUniGrip Calibra – Technical Data Pack – ENG

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertFind a Stockist

Common Applications

HVAC Equipment

Pipework

Cable Containment

Combined Modules

Exhibition Rigging

HVAC Equipment

Pipework

Cable Containment

Combined Modules

Exhibition Rigging

Downloads

ICC-ES PMG 1408 – Multiple
UniGrip Calibra Technical Data Pack (CAN-EN)

Related Products and Accessories

HangPro®

Versatile Adjustable Wire Hanger

Safe Working Load: Up to 55 kg | 110lbs
Safety Factor: 5:1
Wire Compatibility: 1.5 mm / 2 mm
View Product

UniGrip – Standard

Wire Suspension for Slotted Channel or Strut

Max Working Load: 800 lbs / 360 kg
Wire Compatibility: 2 mm, 3 mm, 4.75 mm, and 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 240 lbs / 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – Hook

Hook Attachment Wire Hanger

Safe Working Load: 120 lbs / 55 kg
Wire Compatibility: 2.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – QT (Quarter Turn)

Inner Hanger for Gripple Universal Bracket

Max Working Load: 240 lbs / 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Fixing Variant

Trapeze Plus FR – Range

Fire Rated Cable Hanger Tested to F120

Max Working Load: 225 kg
Fire Testing: BRE tested to F120
Available Drop Lengths: 1 – 10 m (bespoke lengths available on request)
View Product

Contact the Gripple Experts

Enquire Now (CAN)

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

Gripple Inc. Canada Head Office

Contact our dedicated Canadian sales & office team.